JUMO 706521, Operating Manual

Page: 19 / 280

19
3 Mounting
3 Mounting
3.1 General information on mounting
WARNING!
The device is not designed for use in potentially explosive areas.
Explosion hazard.
 Only deploy the device outside of potentially explosive areas.
Mounting site
The device is designed for installation in a panel cut-out. The front of the device and housing have dif-
ferent protection types (see technical data).
Climatic conditions
The ambient temperature and the relative humidity at the mounting site must correspond to the technical
data. Aggressive gases and vapors have a negative effect on the operating life of the device. The mount-
ing site must be free from dust, powder, and other suspended solids.
Installation position
Any installation position may be chosen, however the screen view angle must be taken into consider-
ation (see technical data).
Technical data
 chapter 11.1 "Technical data", Page 265