11
4 Electrical connection
4.1
Installation instructions
❏
The load circuits must be fused for the maximum load currents in each case to
prevent the instrument from being destroyed.
❏
Electromagnetic compatibility meets the requirements of EN 61326,
❏
No other consumers can be connected to the power supply of the instrument.
❏
The instrument is not suitable for installation in areas with an explosion hazard.
❏
Apart from faulty installation, incorrect settings on the instrument may also
affect the proper functioning of the subsequent process or lead to damage.
You should therefore always provide safety equipment that is independent of
the instrument and it should only be possible for qualified personnel to make
settings.
4.2
Color assignment of M12 x 1 round plug
The electrical connection must only be performed by
qualified personnel!
The following color assignment applies only to A-coded standard cables!
1
Brown
2
White
3
Blue
4
Black
5
Gray
1
2
3
4
5
Summary of Contents for 405052
Page 2: ......
Page 47: ...47 9 Setup program HP 1...
