7 Commissioning
36
7.8.2
Setting the final value of scaling (Sc.Hi)
Setting range:
25 to 100% of the nominal measuring range
Factory setting:
Final value of measuring range
Setting
✱
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱
"Rotate" until the bottom line shows "Sc.Hi".
✱
"Press"
7.9
Setting the error signal (S.Err)
Setting
✱
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱
"Rotate" until the bottom line shows "S.Err".
✱
"Press"
The output signal can only be scaled for instruments with
analog output!
Explanation See section 7.8.1 "Setting the starting value of scaling
(Sc.Lo)", page 35.
Enter the value "digit by digit."
"-" Flashing
Continuous
Only for instruments with analog output, an error signal is
generated for overrange or underrange!
Summary of Contents for 405052
Page 2: ......
Page 47: ...47 9 Setup program HP 1...
