Cleaning the unit
28
13.
Cleaning the unit
Before cleaning the unit, disconnect the power plug from the
mains socket!
For cleaning the bath tank and the immersed parts of the circulator,
use low surface tension water (e.g., soap suds).
Clean the outside of the unit using a wet cloth and low surface
tension water.
Prevent humidity from entering into the circulator.
14.
Maintenance
The circulator is designed for continuous operation under normal
conditions. Periodic maintenance is not required.
The tank should be filled only with a bath liquid recommended by
JULABO. To avoid contamination, it is essential to change the
bath liquid from time to time.
Repairs
Before asking for a service technician or returning a JULABO
circulator for repair, please contact an authorized JULABO
service station.
When returning a unit, take care of careful and adequate packing.
JULABO is not responsible for damages that might occur from
insufficient packing.
JULABO reserves the right to carry out technical modifications
with repairs for providing improved performance of a unit.