Safety recommendations
20
8.
Safety recommendations
Follow the safety recommendations to prevent damage to persons
or property. Further, the valid safety instructions for working
places must be followed.
Connect the unit only to a grounded mains power socket!
Observe the flash point of the bath medium used.
The excess temperature protection should be set at least 20 °C
below the fire point.
Pay attention to the thermal expansion of bath oil during heating
to avoid overflowing of the liquid.
Prevent water from penetrating into the hot bath oil.
Some parts of the bath cover and the pump connections may
become extremely warm during continuous operation. Therefore,
exercise particular caution when touching
these parts.
Exercise caution when emptying hot bath liquids!
Observe the limited working temperature range when using plastic
bath tanks.
Employ suitable connecting tubing.
Make sure that the tubes are securely attached.
Avoid sharp bends in the tubing, and maintain a sufficient distance
from surrounding walls.
Regularly check the tubing for material defects (e.g. for cracks).
Before cleaning the unit, disconnect the power plug from the
mains socket.
Recommendation:
When you have finished the application, it is recommended to
keep on circulating the liquid in the bath or the external system for
some time. Simultaneously set the working temperature to +20 °C
to allow the temperature in the system to decrease slowly.
Thus fractional over-heating of the bath liquid is prevented.