MV / MW
15
Warning:
For supervised or unsupervised operation with the AUTOSTART
function, avoid any hazardous situation to persons or property.
The circulator does no longer conform to N.A.M.U.R. recommend-
ations.
Take care you fully observe the safety and warning functions of the
circulator.
6.3.
Setting the temperatures
Setting the working temperature "T1":
Press the setpoint key
.
The indicator light
blinks
and the value previously set
appears on the MULTI-DISPLAY (LED).
Use the cursor keys
to move left or right
on the display until the numeral you wish to change is
blinking.
Use the increase/decrease arrows
to
change the selected numeral (-, 0, 1, 2, 3, ... 9).
Press enter
to store the selected value
(example: 37.0 °C).
The working temperature is maintained constant after a
short heat-up time (e. g. 37.0 °C).
Setting the working temperature "T2":
Press the setpoint key
.
Same procedure
as with "T1"
(example: 25.0 °C).
Selecting the working temperature:
•
Press the setpoint key
or
and then enter
.