Operation
73
8.10.3 Configure alarm outputs
This section describes how the alarm output is configured.
The device is switched on.
The electronics module with analog connections is mounted.
1. Call up the
<Main menu>
.
2.Call up the submenu <Connect unit>.2
3.From the submenu <Interfaces>, select the menu option <Analog module>.3
4. In the menu option
<Alarm output>
, select the condition to be used as
trigger for a connected external circuit.
The alarm output is configured.
8.11 Activating stand-by input
This section describes how standby input can be activated.
The device is switched on.
The electronics module with analog connections is installed.
1. Call up the
<Main menu>
.
2. Call up the submenu
<Connect unit>
.
3. From the submenu
<Interfaces>
, select the menu option
<Analog
module>
.
4. Activate
[Standby]
.
The standby input is activated and can be used.
Summary of Contents for Magio MX
Page 100: ......
