Operation
68
5. In the
[Final state]
field, select how the device should behave after the
timer expires.
6. Enable the
[Activate]
field to start the timer.
The timer is programmed and active. The set duration starts to elapse once
the setpoint temperature is reached.
8.9.2 Creating and editing a temperature control profile
Eight individual temperature control profiles can be created with up to 60
individual steps each. The programmer processes the programmed steps of a
temperature control profile according to the specifications.
The device is switched on.
1. Call up the
<Main menu>
.
2. Call up the submenu
<Use programmer>
then the menu option
<Programmer>
.
3. In the submenu
<Manage profile>
call up one of the profiles.
4. Call up the menu option
<Edit profile>
.
The existing steps of the profile are displayed. If there are no steps, the
[Add step]
softkey appears.
5. Tap on one of the displayed steps and select the step type via the
[Starting via
] button.
Depending on the step type, the parameter gradient or time is shown.
6. Enter the parameters using the softkeys
[Setpoint]
and
[Gradient]
or
[Time]
and confirm your input.
7. If necessary, add a new step to the current step using the soft key
[Add
step]
.
The added step opens as an editable dialog window.
In the submenu
<Manage profile>
, you can use the
[Display profile]
button to display the created profile as a diagram.
8. When you have finished editing the temperature control profile, the soft key
[Back]
takes you back to the submenu
<Use programmer>
.
The temperature control profile has been created and saved.
Summary of Contents for Magio MX
Page 100: ......
