Operation
71
8.9.7 Activate programmer
The programmer is started with a selected profile and runs through the profile
according to the specifications.
The device is switched on.
The programmer is deactivated.
1. Call up the
<Main menu>
.
2. Call up the submenu
<Use programmer>
then the menu option
<Activate programmer>
.
3. First use the
[Select profile]
button to select the desired temperature
control profile.
4. Use the
[Number of runs]
button to specify how often the selected profile
should be repeated.
5. Use the
[Final state]
button to specify how the device should behave after
the end.
6. Select the
[Plan start]
button to specify the start time and start date.
When the programmer is activated, the start time is shown in the
programmer status display on the home screen. As soon as temperature
control application starts, the active profile is displayed.
7. Scroll up the menu page and activate the programmer.
The programmer is activated. It starts either immediately or at the
programmed start time on the specified start date and goes through the
specified number of runs one after the other. After the last run, the device
switches to the defined final state.
When the programmer is active, the
[Quick access programmer]
button
is displayed at the bottom of the home screen. Use this button to stop or
end the programmer, or edit the active profile.
Summary of Contents for Magio MX
Page 100: ......
