-
19
-
(1) Rear placement set-up (TR4NE)
Set the MTC so that the gap is w ithin 54 mm as show n in Figure 9.1. Attach the
adjuster rubber and adjuster spacer at the position where the adjuster retainer can be
attached at the adjuster part, and tighten the lock nut with adjusting its height with the
adjuster. Then fix it with the adjuster retainer.
Be sure to set the MTC so that the gap between the machine unit and
the MTC unit (TR4NE) is 54 mm or less; otherwise, the head may not
move to the pick position.
CAUTION
!
