-
14
-
8 .
Interface with External Equipment
1)
q
is the READY OUT (IN) connector (14-pin) to be connected to external equipment
when you use the machine as inline. The pin assignment is different depending on
the board transport direction; left to right or right to left as indicated in Table 1-4-1
and Table 1-4-2 .
2)
w
is the connector (50-pin) for the signal from/to an optional matrix tray changer.
3)
e
is the power connector (10-pin) (AC 100 V) for an optional matrix tray changer.
4)
r
is the printer connector (D-Sub, 25-pin) and conforms to the Centronics standard.
r
w
e
q
q
Light
Breaker
Figure 8.1 Front left side of the main unit
Figure8.2 Front right side of the main unit
