Installation and operating instructions: JUDO JRSF automatic backwashing protection filter JRSF-ATP DN 125 - 200 (time and differential pressure controlled)
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 24.05.2017
E-mail: [email protected]
judo.eu
41
6.2
Programming
Attention
Only the steps described in Chap. 5.4 - 5.5 may be performed for programming of the
control unit!
Any deviation in this respect can result in damage to the control unit, the software or the
JUDO JRSF automatic backwashing protection filter!
JUDO Wasseraufbereitung GmbH will not be responsible for the resulting damage.
All risks are borne solely by the operator!
The programming procedure is describe briefly below (see Chap. 5.4 - 5.5 for a detailed
description)!
Key Action
Display
Select “Number of backwashes” menu item
Currently set number of backwashes
+/
–
Activate menu item
Number of backwashes flashes
+/
–
Increase/reduce the number of backwashes
Selected number of backwashes
OK
Save the number of backwashes
Saved number of backwashes
Continue to the menu item “Backwashing time”.
Currently set backwashing time
+/
–
Activate menu item
Seconds flash
+/
–
Increase/reduce the backwashing time
Selected backwashing time
OK
Save backwashing time
Saved backwashing time
Continue to the menu item “Timer T1 - T3”.
Menu item “Timer T1 - T3”.
Select m
enu item “T1 On”
Actual set time for T1 On
+/
–
Activate menu item
Time for T1 On flashes
OK
Activate record TS #1
Weekly interval setting flashes
/
Move below desired week
Respectively selected week flashes
+/
–
Activate/deactivate week
Week activated
(e.g. “1”/deactivated (“-”)
Move display line down
Days of the week setting flashes
/
Move below the desired day of the week
Respectively selected day of the week flashes
+/
–
Activate/deactivate day of the week
Day of the week activated (e.g.
“S”/deactivated (“-”)
Move display line down
Hour indicator for T1 On flashes
/
Move between hour, min. and function
Respectively selected item flashes
+/
–
Increase/reduce hour, min., select function
Selected time T1 On with function
OK
Save settings for Timer T1 On
“Writing” is displayed
Continue to the menu item “T1 Off”
Actual set time for T1 Off
+/
–
Activate menu item
Time for T1 Off flashes
OK
Activate record TS #02
Weekly interval setting flashes
/
Move below desired week
Respectively selected week flashes
+/
–
Activate/deactivate week
Week activated (e.g. “1”/deactivated (“-”)
