Page 5/27
The Quality Connection
3-1-4 Place the applicator on the applicator base plate of the crimping press. Pull up on the slide
while pushing back on the lever in the direction of the arrow shown in photo below so the
collar on the top shank slides into the ram groove of the machine. Then push the applicator
until it stops.
Lever
Push
3-1-5 Snugly tighten bolts A and B on the applicator hold down guide with a 5mm hex wrench.
Bolts A
&
B
3-1-6 Replace all safety equipment per the instructions in the crimping machine manual.
