Page 17/27
The Quality Connection
6-8
Terminal Feed Pitch
6-8-1
ring up will make the stroke pitch longer. Moving it down will shorten
the stroke pitch.
Adjustment of terminal feed pitch by stroke adjustment
Feed the terminals so that the contact is centered over crimper anvil (A) (No.163).
Hold the terminal with pressure plate (No.141). To adjust the stroke pitch of feed
finger (No.144) loosen the stroke adjust bearing nut (No.137) fitted to stroke adjust
plate (No.136). Remove stroke adjust screw (No.138) and hexagon nut (No.133), and
move the stroke adjust bearing (No.135) and stroke adjust shaft (No.134). Moving the
stroke adjust bea
6-8-3
e the
rovided on the terminal strip
carrier, use the protrusion to adjust terminal feed.
Adjust the stroke pitch from one square hole on the terminal carrier strip to the next
square hole. When a square hole is not provided on the terminal carrier strip, us
round hole instead. When triangular protrusion is p
