Page 27/27
The Quality Connection
10-2-4 Replace the crimping punches in the ram ensuring that the punches are free to move
0-2-5 Remove the applicator from the crimping press (check the press operation manual for
10-2-6 Check the security of the fastenings. If any part is loose, tighten with the appropriate
hexagon key or spanner supplied with the crimping press.
0-2-7 Remove the ram from the main body of the applicator and clean off all the old grease
from the ram, feed cam and the mating surface of the applicator.
Caution
remov
0-2-8 Apply a thin smear of general-purpose grease to the bearing surfaces of the ram, feed
10-2-9 Apply a few drops of light machine oil to each of the pivot points on the feed-arm
mechanism.
press.
0-2-11 Replace the safety covers.
10-2-12
body. This action will avoid any damage occurring to the crimping dies due to
percussive shock when the crimping punches make contact with the crimping anvils.
ecommended oil is general-purpose machine oil, i.e. ‘3-In-One
™
’ oil
ecommended metal polish is of the paste type, i.e. ‘Solvol Autosol
™
’
. 2002
he contents of this document are subject to revision from time to time. For the latest issue of this leaflet,
please contact J.S.T.
in a lateral axis when the retaining screw is fully tightened.
1
instructions if you are unsure of how to remove the applicator from the press.)
1
If an aerosol degreaser is used to clean the tooling, ensure that all traces of the solvent are
ed prior to reassembly.
1
cam and cam-roller assembly and replace in the body of the applicator.
10-2-10 Replace the applicator in the
1
If it is not intended to replace the applicator in the press, please ensure that the
rubber collar supplied with the tooling is placed between the dials and the applicator
Notes
Recommended materials for maintenance:
Recommended grease should be of the general purpose ‘LM’ type.
R
R
©
J.S.T MFG. CO., LTD
T
