JRC NKG-94, Instruction Manual

Page: 27 / 44

5-1
5. Installation
5.1 Installation Procedure
5.1.1 Desk mounting type installation procedure
When installing, fix the bracket steadily on a hard wood-board with the
JRC-designated screws. If not, it may fall and result in personal injury and/or
damage or of the printer or other things.
When installing on the overhead or wall, it secure
tolerable intensity of the weight,
the force of maintaining check and replacing the printer paper.
If not, it may fall and
result in personal injury and/or damage or of the printer or other things.
The following is the procedures for installing the equipment:
1. Loosen the knobs of the equipment, and then remove the body from the bracket.
2. Screw down the bracket at the desired location with attached the 4 installation screws
（ MPTG31659 ） .
3. Remount the body onto the bracket, and then tighten the knobs to lock the body in place.
Required Space for Equipment Installation
Body Knob
Bracket
160 or more
340 or more
190 or mor
e
Bracket (Bottom Face)
Unit: mm
CAUTION