JRC NKG-94, Instruction Manual

Page: 6 / 44

iv
Operating Precautions
Do not use this equipment anyplace other than specified clause 8.2.
It may cause injury, failure or malfunction.
Do not install the equipment in a place near water, oil, or the medicine, etc.
which might splash.
It may cause injury, failure or malfunction.
Do not use this equipment anyplace other than specified clause 8.2.
It may cause injury, failure or malfunction.
Do not install the equipment in a place of terrific vibration or shock condition.
It may cause injury, failure or malfunction if it falls.
Do not place heavy objects on the printer.
It may cause injury, failure or malfunction.
Do not install this equipment other than our service center or agents.
It may cause failure or malfunction.
Avoid exposure to direct sunlight, heat, extremely high or low temperature,
corrosive gas, moisture, dust or terrific vibration. It may cause fire,
malfunction, and/or deterioration of print-out quality.
Always use the JRC-
designated printer paper (7ZPJD0384). The use of any other
paper may cause printer trouble and/or deterioration of print-out quality.
Do not wire the cable bended with acute angle, twist ,stress, etc.
It may cause fire, injury or electrical shock with the cable crack or the cable
sheath inside damage.
The thermal head of the printer may be very hot after printing. Do not touch the
thermal head of the printer. Make sure the thermal head is cool before replacing
the paper or so.
When cleaning, do not use benzene, alcohol, thinner, or other volatile
solvents. The coated surface may deteriorate or be damaged. Wipe the
surface lightly with a soft cloth.
Use only MF51NR 250V 3.15 fuses. The use of other fuse may cause fire
and/or damage.
CAUTION