JRC NKG-94, Instruction Manual

Page: 28 / 44

5-2
5.1.2 Flush mounting type installation procedure
When installing the flush mounting type, the flush mounting kit (MPBC45945) of the options is required.
The following is the procedures for installing the equipment:
1. Loosen the knobs of the equipment, and then remove the body (including the knobs and the rubber
spacer) from the bracket.
2. Remove the knobs and the rubber spacers from the body.
3. Set the flush mounting panel on the body, and then screw down their sides with the hexagon head
bolts and screw down their bottom with the flat fillister head screws.
4. Insert the equipment setting the mounting panel into the installed place, and then screw down it
with the tapping screws.
Mounting Condition Drawing
Knob
Knob
Rubber Spacer
Body
Rubber Spacer
Bracket
Flush mounting panel
(Flush mounting kit)
Hexagon head bolts
(Flush mounting kit)
Flat head screws
(Flush mounting kit)
Tapping screws
(Flush mounting kit)