JRC NKG-94, Instruction Manual

Page: 18 / 44

3-3
3.4 Feeding the Printer Paper
[Operation]
1. Press the FEED KEY.
Pressing this switch feeds printer paper from the printer.
3.5 Printing
-The printing data is 3 kinds of data which are GPS/navigation/external equipment data. Needed data
can be selected with a dip switch. (Refer to item 5.5 Function Setting.)
- The equipment has 2 kinds of data printing method.
(1) The equipment can print periodically the above data with presetting an appropriate print time
interval. Also the equipment can be set no print.
(2) The equipment can print at arbitrary time by pressing the PRINT KEY.
3.5.1 Printing periodically
-
The equipment can print data periodically with preset print time
interval.
- The print time interval is OFF, 1 min, 3 min, 5 min, 10 min, 20 min,
30 min or 60 min.
- When the preset print time interval is “OFF”, printing is
not activated
periodically.
- The each preset print time interval is based on 0 minutes each hour.
For example, in case the preset print time interval is set 5 min at 10:04,
the equipment prints data in at 10:05, at 10:10, at 10:15, -----.
[Operation]
1. Turn the PRINT TIME INTERVAL SETTING switch to select an
appropriate print time interval.
3.5.2 Printing at arbitrary time
-
The equipment can print at arbitrary time.
- Even if the preset print time interval is set (including OFF), printing
can be carry out at an arbitrary time.
[Operation]
1. Press the PRINT KEY.
Pressing the PRINT KEY allows you to print data at the time
pressed the KEY.