JRC JMA-7110-6XA, Instruction Manual

Page: 444 / 572

9 － 4
JMA-7100 Instruction Manual
>
9.TROUBLE SHOOTING AND AFTER-SALES SERVICE
>
9.1 FAULT FINDING
Table9-5 ： List of Route Messages and Warnings
Message Class Description ALR No.
i
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Approach Alarm Approach the route.
Arrival Alarm Arrive at way point.
Break Off(WPT) Alarm Out of the way point.
Cross Track Error Alarm Go off the route.
Table9-6
：
List of Operational Alarm Messages and Warnings
Message Class Description ALR No.
i
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Can't Transmit Note Tried to transmit within 5 second after standby or
when the transmitter-receiver has any trouble.
Card Full Note Card: Run out of free space.
Copy Failed Note Card: Copy failure.
Delete Failed Note Card: Deletion failure.
Format Card Note Card: Unformatted card.
Format Failed Note Card: Format failure.
Invalid Card Note Card: Invalid card.
Invalid Connection Note The operator set performance monitor to on without
selecting straight.
Invalid Data Note Tried to enter any data beyond its range.
Invalid Range Note TM selection due to TM-disabled range (96 nm).
Zooming in a ZOOM-disabled range (0.125 nm).
MAX Point Note Tried to enter navigation information beyond the
specified.
No Card Note Card not detected yet.
No Heading Data Note Target tracking operation or TM selection when
bearing data is invalid.
No Object Note No object at the cursor-specified position.
No Position Data Note Mark or line input when the latitude and longitude is
invalid.
Not Allowed Note General operation error.
Out of Range Note Out of target acquisition range.
Read Failed Note Card: Read failure.
Slave Mode Note Operation of a menu for the scanner unit when the
slave mode is active.
Write Failed Note Card: Write failure.