manualshive.com logo in svg

JRC JMA-7110-6XA, Instruction Manual

Share
Download
JRC JMA-7110-6XA Instruction Manual Download Page 199

JMA-7100 Instruction Manual

 > 

3.BASIC OPERATION

 > 

3.7  USE ROUTE FUNCTION

3

－

79

3

3.7.4

Use Route Monitoring Function (Waypoint/Route Alarm)

This radar system can monitor the movement of own ship with regard to its route 
and activate a variety of alarms.

3.7.4.1

Destination alarm (Waypoint Alarm)

The destination alarm is activated when own ship has reached next Waypoint or own ship 
has deviated from the scheduled route.

A Waypoint alarm circle with a specified radius distance is displayed.

Waypoint Alarm has the following two types of alarms:

Procedures

1)

Open the WPT/Route Setting menu by performing the menu 
operation below.

→　

2)

Left-click the set value of the  

item, and select 

an operation mode.

Destination alarm

(Waypoint Alarm):

When own ship arrives at next Waypoint, an alarm will
be activated.

Route alarm: When own ship deviates from the specified route, an

alarm will be activated.

Arrival: An alarm is activated when own ship has entered the circle from outside.

Break Off: An alarm is activated when own ship has left the circle to the outside.

To Waypoint

Waypoint alarm circle

Own ship position

Route

2. WPT/Route  Setting

Arrival

0.00nm

1. Waypoint Alarm

Operation mode

Radius of the 

Waypoint alarm 

circle

1. Waypoint Alarm

Summary of Contents for JMA-7110-6XA





























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands