manualshive.com logo in svg

JRC JMA-7110-6XA, Instruction Manual

Share
Download
JRC JMA-7110-6XA Instruction Manual Download Page 262

4

－

12

JMA-7100 Instruction Manual

 > 

4.MEASUREMENT OF RANGE AND BEARING

 > 

4.1  USE OF NAVIGATION TOOLS

[6]

Next

Moves to the next page.

[7]

Range Scale Link

Determines the operation of parallel index line intervals when the range is 
changed.

[8]

Reference Bearing

Sets a reference bearing for the numeric data display of parallel index lines. The 
setting items are determined by the setting of Section [2] "Operation Mode"

a.

If  

is 

selected

b.

If  

is 

selected

 

:The intervals are fixed with the actual range (nm). The
appearance of parallel index line intervals changes
when the range is changed.

 

:The intervals are fixed with the display range. The
parallel index line intervals (nm) change when the
range is changed.

 

:Displayed with true bearing (with North as reference).

 

:Displayed with the heading line as reference.

 

:Displayed with true bearing (with North as
reference).

 

:Displayed with the heading line as reference.

 to 

:Displayed with a specified line as reference.

On

Off

All

True

HL

Individual

True

HL

Index Line1

Line8

Summary of Contents for JMA-7110-6XA





























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands