JRC JMA-7110-6XA, Instruction Manual

Page: 294 / 572

5 － 20
JMA-7100 Instruction Manual
>
5.OPERATION OF TARGET TRACKING AND AIS
>
5.2 TARGET TRACKING OPERATION
5.2.5 Adding Tracked Target ID Name (Name)
The system can enter a name for each of tracking targets that have been acquired.
Procedures
1) Put the cursor on the tracked target, and right-click.
The cursor mode list will appear.
2) Left-click
The Property will appear.
3) Left-click the item button of .
The setting items for ship name (Name) will be displayed.
4) Select the input method.
5.2.5.1 Entering a new ship name (Input)
5) Input a new ship name.
Up to 8 characters can be input as a ship name.For the input method on the character input
screen, see Section 3.3.4.7 "Entering a character".
The input name by selecting is saved in Data Base .
5.2.5.2 Selecting one of previously input ship names (Data Base)
5) Press the [numeric] key corresponding to the ship name to be
selected.
The selected ship name will be entered.
:Selection of one of previously input ship
names.When this method is selected, a list of ship
names that have been input by selecting
will be displayed.
:Input of a new ship name. When this method is
selected, the ship name (Name) input window will
open.
i
Data Base can contain 30 ship names.
8. Property
1. Name
Data Base
Input
Input
Input