manualshive.com logo in svg

JRC JMA-7110-6XA, Instruction Manual

Share
Download
JRC JMA-7110-6XA Instruction Manual Download Page 327

JMA-7100 Instruction Manual

 > 

5.OPERATION OF TARGET TRACKING AND AIS

 > 

5.6  TRACK FUNCTION

5

－

53

5

[4]

Displaying File (Card Target Track Display)

Procedures

1)

Insert the flash memory card into the card slot.

Flash memory card (option) is necessary.

2)

Open the File Operations menu by performing the following 
menu operation.

→

 

→

 

3)

Left-click the item button of 

 to select a card 

slot. 

The setting item for Select Card Slot is switched between Slot1 and Slot2.

4)

Left-click . 

The Card T.TRK Display menu will appear.

Currently saved target ship's track data on the card will be listed.

5)

Left-click the button corresponding to the file to be displayed.

The Confirmation Window will appear.

6)

Left-click 

 to display the T.TRK line.

The selected file will be highlighted, and the currently saved target track data will be 
displayed.

Cancel

1)

Open the Card T.TRK Display window.

The displayed file is highlighted.

2)

Left-click the button corresponding to the displayed file.

The file will be deselected and returned to normal display.

TT

2. Target Track Setting

7. File Operations

1. Select Card Slot

6. Card T.TRK Display

1. Yes

Summary of Contents for JMA-7110-6XA





























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands