JRC JMA-2343, Instruction Manual

Page: 273 / 310

257
(d) Push the soft key 1 and select
ＥＸＰ
ＥＸＰ ＥＸＰ
ＥＸＰ ＯＦＦ
ＯＦＦ ＯＦＦ
ＯＦＦ
.
(e) Push the the soft key
ＰＲＯＣＥＳＳ
ＰＲＯＣＥＳＳ ＰＲＯＣＥＳＳ
ＰＲＯＣＥＳＳ
.
(f) Push the soft key 1 and select
ＡＵＴＯ ＡＵＴＯ ＡＵＴＯ ＡＵＴＯ ＯＦＦ ＯＦＦ ＯＦＦ ＯＦＦ
.
(g) Turn the [GAIN] control to the maximum (turn to maximum clockwise).
(h) Turn the [SEA] control to the mid position.
(i) Turn the [RAIN] control to the minimum (turn to maximum counterclockwise).
(j) Select "MBS LEVEL" in the menu "INITIAL SETTING 1".
(k) Adjust the suppression level pushing the "
▲
(up)" or "
▼
(down)" on the
ＲＡＮＧＥ ＲＡＮＧＥ ＲＡＮＧＥ ＲＡＮＧＥ
key.
(l) Push the
ＥＮＴＥＲ ＥＮＴＥＲ ＥＮＴＥＲ ＥＮＴＥＲ
key.
The suppression level of the main bang has been determined.
(m) Select "MBS RANGE" in the menu "INITIAL SETTING 1".
(n) Adjust the suppression range pushing the "
▲
(up)" or "
▼
(down)" on the
ＲＡＮＧＥ ＲＡＮＧＥ ＲＡＮＧＥ ＲＡＮＧＥ
key.
(o) Push the
ＥＮＴＥＲ ＥＮＴＥＲ ＥＮＴＥＲ ＥＮＴＥＲ
key.
Adjustment of the suppression range of the main bang has been completed.
9.8.9 Display of simulator image
By activating this function, it is possible to display a demonstration screen on the PPI
screen.
To make the setting of this function effective, the power must be once switched off.
(a) Push the
ＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦ ＳＴＢＹ／ＯＦＦ
ＳＴＢＹ／ＯＦＦ
key.
The display will enter the standby mode.