JRC JMA-2343, Instruction Manual

Page: 254 / 310

238
※
The following should be used as the plug side connector for connecting to J3 and J4
Connector Type JRC Code
For J3 LTWD-06BFFA-L180 5JC
DX
00
014
For J4 LTWD-08BFFA-L180 5JC
DX
000
15
9.3.5 Connection of the external buzzer
CAUTION
Only qualified service personnel should perform external buzzer cabling work.
Erroneous connection may cause breakdown or defective operation.
The 5 pin connector side of the cable equipped with connector (7ZCRD0749) should be
attached to EXT2 on the rear panel of display unit after removing the rubber stopper. The
2 pin connector side should be connected to J5 of the display unit main control circuit
(CMC-1156). The 3 pin connector need not be.
Use the 5 pin connector (Type: LTWD-05BFFA-L180, JRC code: 5JC
DX00015
) for the plug
side connector connected to EXT2.
J5 (2 pin)
Main control circuit
(CMC-1156)
Power supply circuit
(CBD-1596)
F1
F2
External connector J5 (5 pin)
Attach after removing the rubber
stopper.
2 pin connector