JRC JMA-2343, Instruction Manual

Page: 207 / 310

191
x PR2: This function is used in stabilizing unstable images using PR1.
This function is effective when sea surface clutter is abundant.
As a rule of thumb, the function should be used at ranges of 3NM or more.
Canceling image processin Canceling image processin Canceling image processin Canceling image processingggg
(a) Select "OFF" in the line "PROCESS" - the menu "FUNCTION".
The image processing function has been canceled.
3.3.22 Moving the center of the PPI screen
By moving the center of the PPI screen (relocating the center), it is possible to extend
the range in any given direction.
z This function is disabled when the zoom function is enabled or the maximum Range
is in use.
Setting the position to which the center is relocated.
Setting the position to which the center is relocated. Setting the position to which the center is relocated.
Setting the position to which the center is relocated.
(a) Push the soft key
ＤＩＳＰＬＡＹ ＤＩＳＰＬＡＹ ＤＩＳＰＬＡＹ ＤＩＳＰＬＡＹ
.
(b) Push the soft key 2 and select first
ＯＦＦ ＯＦＦ ＯＦＦ ＯＦＦ ＣＥＮＴ ＣＥＮＴ ＣＥＮＴ ＣＥＮＴ
and then
ＣＥＮＴＥＲ ＣＥＮＴＥＲ ＣＥＮＴＥＲ ＣＥＮＴＥＲ
.
The marker will be displayed on PPI screen.
(c) Use the cross key to position the marker at the center of the desired PPI screen.
z
The marker may be moved up to within 66% of the monitoring range.
(d) Push the
ＥＮＴＥＲ
ＥＮＴＥＲ ＥＮＴＥＲ
ＥＮＴＥＲ
key.
The center of the PPI screen will move to the designated location.