JRC Alpatron AlphaMidiCourse Installation And Operation Manual Download Page 50

Page: 50 / 82

Is activated when the serial signal from the external heading sensor has stopped or the external heading sensor has
stopped operating.

14. External heading sensor data failure.

Is activated when a failure is generated in the serial signal from the external heading sensor.

Note When this alarm is activated, operate according to Corrective Measures External Heading Sensor
Communication Failure on page 51.

15. LOG (serial signal) communication stop.

Is activated when the serial signal from LOG (serial signal) has stopped, or LOG (serial signal) has stopped
operating.

Note This alarm is activated only when "GYRO" is selected in the system selection and "LOG (serial signal)"
is selected as the ship's speed input system.

16. LOG (serial signal) data failure.

Is activated when a failure is activated in the serial signal from LOG.

Note When this alarm is activated, operate according to Corrective Measures LOG (serial signal)
Communication Failure on page 51.

Note This alarm is activated only when "GYRO" is selected in the system and "LOG (serial signal)" is
selected as the ship's speed input system.

17. LOG (contact) failure.

Is activated when a failure is activated in LOG (contact).

Note This alarm is activated only when "LOG" is selected for the ship's speed input system.

18. E5V failure

Is activated when failure is generated in the power supply for the serial signal.

50 | Operation

Summary of Contents for Alpatron AlphaMidiCourse



















































































Search results

Summary of Contents for Alpatron AlphaMidiCourse

Reviews:

Related manuals for Alpatron AlphaMidiCourse

Brands by name

Popular brands

JRC Alpatron AlphaMidiCourse, Installation And Operation Manual

Search results

Summary of Contents for Alpatron AlphaMidiCourse

Reviews:

Related manuals for Alpatron AlphaMidiCourse

Brands by name

Popular brands