JR Vibe 90SG, Assembly Instructions Manual

Page: 41 / 106

41
Lower Tail
Support Clamp
Upper Tail
Support Clamp
Tail Brace Tube (2pcs)
Tail Brace Connector (4pcs)
Horizontal Fin
Flat Washer, 3mm (2pcs)
Socket Head Bolt,
3 x 8mm (2pcs)
Socket Head Bolt,
2.6 x 12mm (4pcs)
Nylon Lock Nut,
3mm (2pcs)
d
e
R
)
2
x(
)4x
(
dl
e
W
BJ
Position the horizontal fin so that it is
level to the building surface (90 degrees
to the main rotor shaft) and tighten the
two Tail Support Clamp Bolts.
5-8 TAI L B OOM B R A CE ASSEMBLY
5-9 TAIL BOOM BRACE INSTALLATION
Socket Head Bolt, 2.6 x 12mm (4pcs)
Socket Head Bolt, 3 x 12mm (2pcs)
Nylon Lock Nut, 3mm (2pcs)
Flat Washer, 3mm (4pcs)
Note the proper direction
of the Tail Brace Connectors.
Note the proper direction
of the Lower Tail Support Clamp.
d e R ) 2 x (
Socket Head Bolt, 3 x 8mm (2pcs)
Socket Head Bolt, 3 x 10mm (2pcs)
Button Head Bolt, 3 x 6mm (2pcs)
Socket Head Bolt,
3 x 10mm (2pcs)
Flat Washer,
3mm (2pcs)
Socket Head Bolt, 3 x 12mm (2pcs)
Button Head Bolt,
3 x 6mm (2pcs)
Front
d
e
R
(x2)