51
E) Servo Reversing
Move the roll selector and highlight REV.SW on the screen, then press the roll selector to enter the function. Next,
reverse channels 1, 2, 3 and 4 by moving the roll selector, and pressing as needed to change from NORM to REV.
Press the LST key to return to the menu.
F) Travel Adjustment
Move the roll selector until TRVL ADJ is highlighted on the screen, then press the roll selector to enter the function.
Adjust the values as shown by moving the roll selector to highlight the desired channel, while using the control stick
to select up/down, or left/right values to be adjusted. Please note that the required travel values will vary based on
the type of servo selected. Press the LST key to return to the menu.
G) CCPM Settings
Move the roll selector to highlight the SWASH MIX function, then press the roll selector to enter the function. Set the
value of the aileron, elevator, and pitch functions from the factory default setting using the rolling selector. Press the
LST key to return to the menu.
Summary of Contents for Vibe 90SG
Page 77: ...77 ...
Page 105: ...105 ...
