31
Grip Spacer (2pcs)
Spindle Shim Washer (2pcs)
Main Rotor Hub
Blade Spindle Shaft
Head Button
Socket Head Bolt, 3x8mm
O-ring Damper, 10 x 18 x 4mm (4pcs)
4-3
R OTOR H E A D ASSEMBLY
Grip Spacer (2pcs)
Socket Head Bolt, 3 x 8mm (1pc)
Long Shank Bolt, 5mm (2pcs)
Thrust Washer (2pcs)
O-ring Damper, 10 x 18 x 4mm (4pcs)
Apply a light coating
of grease.
Spindle Shaft Tube
Socket Head Bolt, 5 x 10mm (2pc)
Nylon Lock Nut, 5mm (2pcs)
Spindle Shaft Washer (2pcs)
Spindle Shim Washer (2pcs)
d
e
R
Main Rotor Hub
Main Blade Holder
Note the proper direction
of Grip Spacer.
Note:
When installing the blade grips,
be sure the spindle shaft is centered in
the hub, and tightening the spindle bolts
down does not cause a notchy bearing
feel in the grips. Remove the steel shim
washer or use thinner steel shim washers
if required.
Damper Rubber 90° (2pcs)
Damper Rubber 90° (2pcs)
(for adjustment)
Large I.D.
Apply Grease
Small I.D.
Nylon Lock Nut,
5mm (2pcs)
Main Blade Holder
Rotor Spacer (4pcs)
Socket Head Bolt,
5 x 10mm (2pcs)
Thrust Bearing,
9 x 17 x 5mm (2pcs)
Spindle Shaft
Washer (2pcs)
Long Shank Bolt,
5mm (2pcs)
)
2
x(
d
e
R
Thrust Washer
Offers extra-hard dampening
for extreme 3D and instant response.
Offers medium-hard dampening
for 3D and smooth tracking in flight
Note
: Install thrust BB CAGE toward mainshaft, exposed balls
to Blade side of grip. (The thrust race will keep grease in, and
positioning the cage this way will prevent any possible cage
deformation from balls jamming on the cage that will be thrown
outward during use.)
Summary of Contents for Vibe 90SG
Page 77: ...77 ...
Page 105: ...105 ...
