16
3-1
MAIN DRIVE GEAR/AUTOROTATION ASSEMBLY
3-2
MAIN DRIVE GEAR/AUTOROTATION ASSEMBLY INSTALLATION
3x6mm Socket Head Bolt
.......4 pc
3mm Lock Nut
........1 pc
4x4mm Set Screw
........4 pc
......1 pc
3x22mm Socket Head Bolt
1. Secure the Autorotation Hub to the Main Rotor Shaft using
the 3x22mm Socket Head Bolt. Next, slide the Main Shaft
Collar onto the Main Rotor Shaft. While pulling upward on
the Main Rotor Shaft, secure the Main Shaft Collar to the
Main Rotor Shaft using the four 4x4mm Set Screws.
2. Once the Main Shaft Assembly is in place, adjust the gear mesh of the Clutch Bell
and Tail Belt Pinion Gears, and secure the bolts left loose from Step 2-1.
3x6mm Socket Head Bolt (4 pc)
[Tighten equally to prevent
warping of Main Drive Gear]
Main Drive Gear
Autorotaion Assembly
Main Shaft Collar
8mm
3mm
4x4mm Set Screw (4 pc)
Main Rotor Shaft
3mm Lock Nut
3x22mm Socket Head Bolt
Autorotation Hub
Use Threadlock
Use Threadlock
Summary of Contents for ERGO .32
Page 66: ...Heli Division Revised 3 4 97...
