3-7
ENGINE INSTALLATION (ALL)
3-8
INSTALLATION OF THE MUFFLER
20
Pressure Tap
........1 pc
3x30mm Socket Head Bolt
.......2 pc
Adjust the height and position of the Engine
as shown so the bottom of the Clutch
Assembly is flush with the bottom of the
Clutch Bell. Also check to insure that the
Engine and Clutch Bell are parallel.
*It is highly recommended that you insert
the Muffler Bolts into the Engine Case prior
to installing the engine in the frame.
Note: The installation shown is for a .32-.36 size
engine with the JR muffler (JRP960078).
Installation of other .32-.36/.46 engine
muffler combinations may vary. Please refer
to your engine/muffler instructions for proper
installation.
3x10mm Socket Head Bolt
........4 pc
3mm Flat Washer
........4 pc
3x10mm Socket Head Bolt (4 pc)
3mm Flat Washer (4 pc)
Pressure Fuel Line Attachment
3x30mm Socket Head Bolts
(*Inserted in Step 3-7)
JR .32-.36 Muffler Shown
(Purchased Separately, JRP960078)
Pressure Tap
Correct
Incorrect
Use Threadlock
Summary of Contents for ERGO .32
Page 66: ...Heli Division Revised 3 4 97...
