
27
GB
INSTRUCTIONS FOR UNINSTALLING THE BASE
Press ISOFIX release button to make ISOFIX connectors
come out of the base.
Push the ISOFIX base(A3),until ISOFIX connectors are
completely locked with the connection device of car.
“CLICK”sound indicates that ISOFIX connector has been
locked(A4,A5).
When the end of ISOFIX connector turns to green,it is
locked.Shown in red, it is not locked(A4).
Adjust the length of the leg to make sure that the leg can
touch the ground of the car very steadily(A5).
12. Instructions of uninstalling the base
Press ISOFIX unlock button to release the ISOFIX
(B1,B2).
If you don’t need to use car seat,press ISOFIX adjusting button.At the same
time,another hand push ISOFIX,according to the direction of the arrow to push
can shrink ISOFIX connector(B3).
base
10.Remove the buckle and car seat pad
11. Instructions of installing the base
STEP 1:
Release the buckle(fig.1),release the shoulder belt as long as you can.
STEP 2:
(fig.2)
STEP 3:
Take out the buckle from the pad(fig.3).
Please keep the buckle and crotch pad as well.
Please adjust the seat to the biggest angle,you will see the end bracket
under the car seat.Then you can pull out the harness from the solt which under
the car seat
.
Note:
Pay attention:
if not necessary,please do not disassemble the shoulder belt.
STEP 5:
Pull all direction to take out the cover(fig.6)
★
The above steps in turn, that is the cloth cover installation method
STEP 4:
comfortable cushion,chest pad and buckle connectors(fig.5).
Slide both of the harness off the harness connector(fig.4),and take off
the
9
10
1
2
3
4
5
6
A2
A5
A6
Note:Leg not hanging in the air or other items can be used to support.At the same
time to ensure that the leg is no higher that the safety seat.Check whether leg
shows green(A6).
B2
B3
CLICK
A4
√
×
CLICK
UNLOCK
B1
PRESS
A1
A3
When you wish to detach the base from the vehicle’s seat, press both ISOFIX release buttons located
on the side of the base’s ISOFIX connector arms and pull the base out (fig.B1/B2).
To retract the ISOFIX connector arms back inside the base, press the release button with one hand
and push them back inside with the other (fig.B3).
INSTALLING THE CHILD SEAT ONTO THE BASE
15. Installing the safety group 0+
14. Installation of installing the shell
Put the shells on the base,heard “CLICK”,and check the color of the knob
place, whether it is green.
13. Shell unlocked instructions
Press the insurance device and push the button as the direction of arrow.
At the same time, another hand takes shell upwards. Shell will be separated
from the base.
11
12
1
2
3
推
PUSH
OK!
C2
C 4
C 6
C 6
C 5
It is suitable for the weight 0-13kg,given to children under the age of about 1.
STEP 1:
Flat on the ISOFIX base on the car seat,the ISOFIX base connected with the
connection device on the car(C1).
Combine the car seat with isofix base(C2,C3,C4).
NOTE:
Pull outward ISOFIX base to ensure that both sides have been locked.
STEP 2:
STEP 3:
There are 3 recline position available. Adjust the seat to suitable position(C5).
STEP 4:
Push in the direction of car back seat,make sure that the front of the baby
seat is firmly pressed against the backrest of car seat (C6).
STEP 5:
By adjusting the length of the leg to make it
touch the ground of car.
Leg not hanging in the air or other items can be
used to support.At thesame time to ensure that the leg
is no higher than the safety seat.Check whether leg
shows green(C7).
NOTE:
C3
OK!
C1
Insert the seat into the base. Correct attachment is signalled by a “click” and a green indicator.
RELEASING THE SEAT FROM THE BASE
15. Installing the safety group 0+
14. Installation of installing the shell
Put the shells on the base,heard “CLICK”,and check the color of the knob
place, whether it is green.
13. Shell unlocked instructions
Press the insurance device and push the button as the direction of arrow.
At the same time, another hand takes shell upwards. Shell will be separated
from the base.
11
12
1
2
3
推
PUSH
OK!
C2
C 4
C6
C 6
C 5
It is suitable for the weight 0-13kg,given to children under the age of about 1.
STEP 1:
Flat on the ISOFIX base on the car seat,the ISOFIX base connected with the
connection device on the car(C1).
Combine the car seat with isofix base(C2,C3,C4).
NOTE:
Pull outward ISOFIX base to ensure that both sides have been locked.
STEP 2:
STEP 3:
There are 3 recline position available. Adjust the seat to suitable position(C5).
STEP 4:
Push in the direction of car back seat,make sure that the front of the baby
seat is firmly pressed against the backrest of car seat (C6).
STEP 5:
By adjusting the length of the leg to make it
touch the ground of car.
Leg not hanging in the air or other items can be
used to support.At thesame time to ensure that the leg
is no higher than the safety seat.Check whether leg
shows green(C7).
NOTE:
C3
OK!
C1
Summary of Contents for JL-1048 SECURFIX BEEP
