25
installaton guide
www.jouleuk.co.uk
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user .
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
• 2 operating times for days 1 to 5
• 2 operating times for days 6 and 7
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
Setting the operating times
• Call up function “P2” or “P3”.
• Press “OK”. The start of the first operating time flashes.
• Set the start of the operating time using the “+” and “-” buttons.
• Press “OK”. The end of the first operating time flashes.
• Set the run time using the “+” and “-” buttons.
• Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the
first operating time, the first operating time ends automatically when
the second operating time starts .
• Set the start of the second operating time using the “+” and “-”
buttons .
• Press “OK”. The end of the second operating time flashes.
• Set the run time using the “+” and “-” buttons.
• Press “OK”. The operating time for days 1 to 5 is saved.
• Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the
process of setting the operating times is complete .
1. Start of the first operating time
2. End of the first operating time
3 . Start of the second operating time
4 . End of the second operating time
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
Deleting the operating time
• Set the start and end of the operating time to the same time. The
operating time is deleted .
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
symbol is displayed During appliance operating time .
22
ENG
Installation and user manual
“P2” and “P3” operating times
The heat pump runs according to the operating times set by the user.
Setting the operating times for “P2” and “P3”
4 operating times are set for each function:
•
2 operating times for days 1 to 5
•
2 operating times for days 6 and 7
Setting the operating times
•
Call up function “P2” or “P3”.
•
Press “OK”. The start of the first operating time flashes.
•
Set the start of the operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the first operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The start of the second operating time flashes.
If the start of the second operating time is set so that it is within the first
operating time, the first operating time ends automatically when the second
operating time starts.
•
Set the start of the second operating time using the “+” and “-” buttons.
•
Press “OK”. The end of the second operating time flashes.
•
Set the run time using the “+” and “-” buttons.
•
Press “OK”. The operating time for days 1 to 5 is saved.
•
Repeat the steps above for the operating times for days 6 and 7.
Once you have set the second operating time for days 6 and 7, the process of
setting the operating times is complete.
1. Start of the first operating time
2. End of the first operating time
3. Start of the second operating time
4. End of the second operating time
Deleting the operating time
•
Set the start and end of the operating time to the same time. The operating
time is deleted.
If you do not wish to set a second operating time:
• Set the start and end of the second operating time to the same time.
The display will show “--:--”.
“
“ symbol is displayed During appliance operating time.
“
“ symbol is displayed Outside of appliance operating time.
symbol is displayed Outside of appliance operating time .
