10
www.joule.ie
1
1.5 STORAGE AND TRANSPORT
WARNING Transport damage!
• Take care when handling the appliance.
• To avoid dropping and damaging the appliance, do not pivot it.
NOTICE Transport damage!
• To avoid transport damage, do not remove the protective packag-
ing . Wait until the appliance is at the installation location to remove
the protective packaging .
• Transport and set down the appliance carefully. Jerky movements
can damage the components, the vessel and their connections or
the external casing .
• Use suitable means of transport to bring the appliance to the in-
stallation location (special car, pallet truck, etc).
General information
The appliance is delivered on a single pallet and is protected against
transport damage by special packaging . The appliance must be stored
and transported vertically in its original packaging
1
and the cylinder
must be empty. Ambient temperatures of -20 °C to +60 °C are permis-
sible for storage and transport .
This device is not intended for use by persons (including children) with
physical, sensory or mental disability, of by persons with lack experi-
ence or knowledge, unless they have received from a person in charge
of their safety adequate supervision or preliminary instructions on how
to use the device . Dare must be taken at all times to keep children from
playing with the device .
1.6 SCOPE OF SUPPLY
1 Joule HeatBank
2 Set of documents
3 Condensate drain and hose pillar
1
Horizontal transportation is permitted over short distances, provided that the conditions de-
scribed above are fulfilled.
8
ENG
Installation and user manual
1.5 STORAGE AND TRANSPORT
WARNING: Transport damage!
•
Take care when handling the appliance.
•
To avoid dropping and damaging the appliance, do not pivot it.
NOTICE: Transport damage!
•
To avoid transport damage, do not remove the protective packaging. Wait
until the appliance is at the installation location to remove the protective
packaging.
•
Transport and set down the appliance carefully. Jerky movements can
damage the components, the vessel and their connections or the external
casing.
•
Use suitable means of transport to bring the appliance to theinstallation
location (special car, pallet truck, etc).
General information
The appliance is delivered on a single pallet and is protected against transport
damage by special packaging. The appliance must be stored and transported
vertically in its original packaging
1
and the cylinder must be empty. Ambient
temperatures of -20 °C to +60 °C are permissible for storage and transport.
This device is not intended for use by persons (including children) with
physical, sensory or mental disability, of by persons with lack experience or knowledge, unless they have received
from a person in charge of their safety adequate supervision or preliminary instructions on how to use the device.
Dare must be taken at all times to keep children from playing with the device.
1.6 SCOPE OF SUPPLY
1-Flamco VHW 260
2-Set of documents
3-Condensate drain and hose pillar
1 Horizontal transportation is permitted over short distances, provided that the conditions described above are fulfilled.
Flamco VHW 260
Sanitary heat pump
-10 °C to 35° C
Flamco VHW 260
Contents (adapt in own language)
ENG
Installation and user manual
3
2
3
1
Data plate
The data plate is located on the rear side of the appliance .
8
ENG
Installation and user manual
1.5 STORAGE AND TRANSPORT
WARNING: Transport damage!
•
Take care when handling the appliance.
•
To avoid dropping and damaging the appliance, do not pivot it.
NOTICE: Transport damage!
•
To avoid transport damage, do not remove the protective packaging. Wait
until the appliance is at the installation location to remove the protective
packaging.
•
Transport and set down the appliance carefully. Jerky movements can
damage the components, the vessel and their connections or the external
casing.
•
Use suitable means of transport to bring the appliance to theinstallation
location (special car, pallet truck, etc).
General information
The appliance is delivered on a single pallet and is protected against transport
damage by special packaging. The appliance must be stored and transported
vertically in its original packaging
1
and the cylinder must be empty. Ambient
temperatures of -20 °C to +60 °C are permissible for storage and transport.
This device is not intended for use by persons (including children) with
physical, sensory or mental disability, of by persons with lack experience or knowledge, unless they have received
from a person in charge of their safety adequate supervision or preliminary instructions on how to use the device.
Dare must be taken at all times to keep children from playing with the device.
1.6 SCOPE OF SUPPLY
1-Flamco VHW 260
2-Set of documents
3-Condensate drain and hose pillar
1 Horizontal transportation is permitted over short distances, provided that the conditions described above are fulfilled.
Flamco VHW 260
Sanitary heat pump
-10 °C to 35° C
Flamco VHW 260
Contents (adapt in own language)
ENG
Installation and user manual
3
2
3
1
2
1
3
