28
When building a brick surround
If building a brick surround, a leg rack (optional, item no.
51044759) must be used. NB: Maximum leg length must be
used! See
Fig. 1 e and 1 f
. The base is designed so that space
is left to the bricks on the inside of the frame that is provided.
Fig. 39
1. The bricks are laid so that they
fi
t under the insert frame.
Fig. 40
A
2. The last bricks
(A)
are cut to
fi
t between the leg base and
the frame.
NB: Remember to leave openings in the
brickwork for convection air (Fig. 1 e and f).
5.0 Daily use
5.1 Control handles
Ignition vent (A)
This vent is used when lighting the
fi
re and to get the
fi
re going
well when adding more wood. If continuously
using hard wood, such as oak and beech, the ignition vent can
be open 0% to 50%. If using soft wood, such as birch and pine,
the ignition vent can be closed.
Setting for normal use: 0% to 50%.
Through air or air vent (B)
The through air is preheated and added to the
fi
re indirectly.
The through air also
fl
ushes the glass to prevent the formation
of soot. Soot may form on the glass if the through air control is
set too low. The heat output is determined by the through air.
Setting for normal use: 40% to 70%.
Clean Burn Technology
The Jøtul I 520 incorporates clean burn technology. The air
passes through a specially-designed duct system. This ensures
optimal combustion of the gases that are released during the
burning process. The pre-heated air passes into the burn
chamber through the small holes in the back burn plate of the
chamber. The air
fl
ow is determined by the combustion rate and
cannot therefore be regulated.
ENGLISH
Summary of Contents for i 520
Page 25: ...25 ENGLISH B min 505 mm min 13 mm max 35 mm adjustable min 650 mm min 540 mm...
Page 56: ...56 B min 520 mm min 13 mm max 35 mm verstelbar min 660 mm min 540 mm NEDERLANDS...
Page 87: ...87 B min 520 mm min 13 mm max 35 mm Einstellbar min 660 mm min 540 mm DEUTSCH...
Page 98: ...98 BELGI...
