15
ENGLISH
Top outlet
The product is factory-
fi
tted for a top outlet. The inner rear heat
shield should be raised to protect the rear wall against heat
from the
fl
ue pipe.
Fig. 6
A
A
1. Loosen the four screws
(A)
.
Fig. 7
B
B
A
2. Pull the inner heat shield
(A)
up.
3. Secure it in place using the two upper screws
(B)
.
Converting to a rear outlet
The smoke outlet can be converted to a rear outlet if necessary.
The smoke bell can also be installed from the inside if the space
where the burn chamber is to be installed is con
fi
ned.
Remove the four screws that were mentioned in Fig. 6
.
Fig. 8
A
1. Remove the inner heat shield
(A)
.
Fig. 9
A
1
2
B
B
2. If using a rear outlet, the curved section
(A)
must be removed
fi
rst. Cut along the knock-out holes
(B)
. Then snap o
ff
the
knock-out section.
Summary of Contents for i 520
Page 25: ...25 ENGLISH B min 505 mm min 13 mm max 35 mm adjustable min 650 mm min 540 mm...
Page 56: ...56 B min 520 mm min 13 mm max 35 mm verstelbar min 660 mm min 540 mm NEDERLANDS...
Page 87: ...87 B min 520 mm min 13 mm max 35 mm Einstellbar min 660 mm min 540 mm DEUTSCH...
Page 98: ...98 BELGI...
