13
ENGLISH
Outside air connection
An optional outside air connection kit is available to order.
(Comes with its own manual - Outside air connection Ø
100, item no. 10026187)
. The duct connector
fi
ts Ø100 and
Ø 80 fresh air intake tubes.
This is done
before
bricking in or building the surround.
Full compliance with
fi
re codes and regulations is essential if
installing in a pre-existing hearth (open
fi
replace).
External air supply
Fig. 3
A
1. The product has an air intake
(A)
at the rear. If necessary,
the air intake can be moved to the bottom of the product.
See
Fig. 4
Fig. 4
A
B
C
D
2. Unscrew the two screws
(B)
and remove the air intake
connector
(A)
.
3. Then unscrew the two screws
(D)
beneath the burn chamber
and remove the cover
(C)
.
4. Install the connector
(A)
beneath where the cover was
placed and secure the connector with screws
(B)
.
5. Then secure the removed cover over the air intake hole at
the rear. Secure it in place using the same screws.
Fig. 4-b Requirement for UK - Smoke control areas
The Jøtul I 520 stoves have been recommended as suitable
for use in smoke control areas. Make this adjustments to
prevent complete primary air control closure.
•
Open the door.
•
Pull out the primary air valve handle.
•
Place the screw (included in the screw bag) in the shown
postition
(UK ONLY).
Summary of Contents for i 520
Page 25: ...25 ENGLISH B min 505 mm min 13 mm max 35 mm adjustable min 650 mm min 540 mm...
Page 56: ...56 B min 520 mm min 13 mm max 35 mm verstelbar min 660 mm min 540 mm NEDERLANDS...
Page 87: ...87 B min 520 mm min 13 mm max 35 mm Einstellbar min 660 mm min 540 mm DEUTSCH...
Page 98: ...98 BELGI...
