26
Placing an insert inside an open
fi
replace
Fig. 30
1. Cut along the knock-out holes at the top of the heat shield
and remove that section.
Fig. 31
Fig. 32
2. Before inserting the burn chamber inside the
fi
replace,
remove the log retainer, side burn plates, back burn plate,
ba
ffl
e and exhaust de
fl
ector. These are
fi
tted back into place
when the
fl
ue pipe and smoke bell have been installed. See
the
fi
gures below.
Fig. 33
3. Slide the burn chamber in on the moulded runners on
the bottom until it is in place. Level the burn chamber as
described in “Levelling the insert”.
Fig. 34
A
4. Fit the gasket
(A)
onto the edge of the
fl
ue pipe.
ENGLISH
Summary of Contents for i 520
Page 25: ...25 ENGLISH B min 505 mm min 13 mm max 35 mm adjustable min 650 mm min 540 mm...
Page 56: ...56 B min 520 mm min 13 mm max 35 mm verstelbar min 660 mm min 540 mm NEDERLANDS...
Page 87: ...87 B min 520 mm min 13 mm max 35 mm Einstellbar min 660 mm min 540 mm DEUTSCH...
Page 98: ...98 BELGI...
