jotron MPA 1600, User And Installation Manual

Page: 29 / 62

30
User and Installation Manual
Compact MPA
Figure 5: General Tab
The “General”-tab allows users to set the name of the configuration, select if the system is a single system or a duplicated
system (A/B) and view the versions of firmware components.
The name of the configuration is a simple string describing the configuration in some way. This can be any string, and is just
for documentation purposes.
The system type is either a duplicated system or a single system. A duplicated system means that there are two Compact
MPA systems in A/B-system configuration present for redundancy. Single system means that there is just one Compact MPA
system present, with no redundancies.
For duplicated systems, please note that there is a DIP-switch must be set in the correct position for the B-system. Please see
the Installation section for details.
Firmware version information is present to aid in support and to allow users to see if the firmware must be updated.
6.3 CONFIGURATION – GENERAL