ENGLISH
07.3
ASSEMBLY SEQUENCE FOR THE INSTALLER
The fireplace travels on pallet. To facilitate assembly and transport open the fireplace and remove the various components.(
F
ig
. 2-3
)
;
To unlock the fireplace door with vertical sliding, unscrew and remove the M8 screw, as shown in
F
ig
. 1,
on the sides of the fireplace.
Phase 1:
Once the fireplace is positioned in the desired place, it is necessary to make sure that the fireplace is perfectly levelled. Adjust
the feet height if necessary (see point a). The device must only be installed indoors and on surfaces able to support the load. If the existing
construction does not meet such requirements, it will be necessary to take appropriate measures (for example, creating a load-distribution
plate). The appliance must be installed in an area that can be easily accessed for maintenance of the fireplace and the flue.
Perform all the hydraulic connections and fill the fireplace and the system with water. Make sure there are no leaks.
Phase 2:
Connect the chimney to the fireplace smoke exhaust (see chap. 07.1).
Phase 3:
Assemble the internal panels and the smoke deflector (see point b).
Phase 4:
Make the electrical connections to the control unit (see chap. 07.6).
The display must be positioned outside the coating.
Check proper pump operations before starting the fireplace.
Phase 5:
In case you want to open the vertical sliding door with the removable handle only, it is possible to remove the supplied handle by
unscrewing the screws under the same handle (see point c).
Phase 6:
Build the coating providing for the specific openings on the coating, depending on the configuration type (see chap. 07.4).
After preparing the electrical connections, the hydraulic fittings and the air inlets depending on the configuration type, perform the following
operations
a) Feet adjustment
To adjust the feet height use the 14 mm key. Screw clockwise or anticlockwise the nut 1 to lift or lower the foot.
F
ig
2
F
ig
. 3
F
ig
1
F
ig
. 1
1
19
Summary of Contents for TERMOJOLLY 80 EVO
Page 42: ...42 NOTES...
Page 43: ...ENGLISH NOTES 43...
