ENGLISH
Cleaning the fire bed and removing the ash drawer.
Make sure the fireplace and the residual ashes are cold. Clean the fire bed from combustion ashes as needed or when necessary (taking
into account that the presence of an ash layer on it contributes to an easier starting).
To remove the ash drawer, remove the grate (1) (
F
ig
.
1
) and then remove the ash drawer (2) (
F
ig
.
2
) to fully empty. Use an ash vacuum
cleaner to also clean the support base (3) of the ash drawer (
F
ig
.
3
).
At the end of the cleaning operations, assemble everything correctly.
To dispose residual ash, refer to the municipal/national regulations in force.
Glass
Use specific products. Be careful not to use overly aggressive product to avoid ruining the frame paint. Never spray detergents directly
onto the parts to be cleaned.
Do not clean the glass parts when still hot to prevent damaging them.
If the fireplace requires more frequent cleaning, check the flue draught as it may be insufficient.
Time between one cleaning and the next is strictly tied to fuel quality. The most suitable cleaning frequency can
only be established a few days after use according to the actual amount of deposited residue and may vary from
recommended Jolly Mec intervals.
NOTE
F
ig
. 1
F
ig
. 2
1
F
ig
. 3
3
2
39
Summary of Contents for TERMOJOLLY 80 EVO
Page 42: ...42 NOTES...
Page 43: ...ENGLISH NOTES 43...
