background image

4

CHAP.01 PREMISES

 01.1  WARNINGS

• 

Familiarity and compliance with the instructions given in this manual will ensure quick installation and correct use of the appliance.

• 

Read the manual attentively before commencing installation, and be certain to follow the directions it contains, otherwise the war

-

ranty could be invalidated and the performance and safety of the appliance jeopardized.

• 

The installation manual is an integral part of the product and must be given to the user.

• 

It must be kept in a safe place and consulted carefully, as all of the warnings provide important information on safety during instal

-

lation, use and maintenance.

• 

Incorrect installation of the appliance could cause damage and injury to people or animals, for which the manufacture cannot not be 

held liable.

• 

Installation shall be performed by qualified operators in accordance with the regulations in force in the Country of installation.

• 

The manufacturer declines any contractual or non-contractual liability for damages caused by errors in installation or use of the 

appliance or failure to follow the instructions contained in this manual.

• 

All rights on the reproduction of this technical manual are owned by Jolly Mec Caminetti S.p.A.

• 

The descriptions and illustrations provided in the following publication are not binding.

• 

Jolly Mec Caminetti S.p.A 

 reserves the right to make any modifications that may be deemed appropriate.

• 

This manual cannot be given to third parties for perusal without the written permission of 

Jolly Mec Caminetti S.p.A

• 

The technical directions for installation contained in this manual should be considered as basic requirements. Regulations in some 

countries may be more restrictive; in this instance, comply fully with the regulations prevailing in the country of installation (

all laws 

and local bylaws must be observed when installing and using the appliance, including those referring to national and 

European standards).

• 

Never use the appliance as an incinerator, or in way other than that for which it was designed. Any other use is deemed improper 

and therefore dangerous.

• 

Do not use fuels that are not recommended under penalty of cancellation of the warranty.

• 

When the appliance is running, the glass and other visible parts reach extremely hot temperatures to the touch; handle with extreme 

care to avoid burns.

•   Do not place the appliance in direct contact with combustible materials.

• 

Do not make any unauthorised modification to the appliance. Any unauthorised modification will automatically invalidate the warranty 

and release the manufacture from all liability.

• 

Use only original spare parts recommended by the manufacturer. Original spare parts are available through retailers, specialised 

Technical Service Centers, or directly at the head office of Jolly Mec Caminetti S.p.A.

• 

Acceptance of the machine by the user must be “total”, including the sound level of operation, comparable to an electrical appliance. 

Complaints for characteristics not indicated in this manual shall not be accepted.

Summary of Contents for QL10

































Reviews: