ENGLISH
08.2
TIPS FOR THE USER
• The glass door must remain closed during wood combustion; it can only be opened to add more wood.
• When purchasing firewood, it is advisable to vary the sizes, but with a length as to be able to light quickly, but also long
charges and, if the quality of the wood is good, efficiency and functionality will also be excellent.
• The presence of condensation inside the device could be caused by weak flue draught (clean the flue), damp or low
quality wood, or inadequate or inexistent air intake.
• No other boilers, flues, stoves, fireplaces or air extractors must be in the same room (excluded of the type “C” according
to UNI 10683).
• The device must not be used to burn anything other than the recommended fuels as the combustion by-products could corrode the
device or the temperature generated could compromise its integrity.
• The device must not be placed in direct contact with fuel materials
(for information on distances see
CHAP.07.4 -
SAFETY
DISTANCES FROM SURROUNDING FLAMMABLE MATERIALS
)
• Regular and methodical maintenance is all-important for correct operation and maximum efficiency.
• The high performance and efficiency of this device is achieved by operating with closed doors. If the doors are opened and the flue
draught is not optimal, small puffs of smoke may occasionally occur.
Never touch the parts of the hearth without cladding with naked hands, except the handle, as they become very
hot, always use heat protection gloves, such as those supplied with the device, when handling all parts.
In case of problems related to the device, contact the specialised Technical Service Center.
In the event of a chimney fire call the Fire Department.
WARNING
MORE CLEANING = HIGHER PERFORMANCES
27
Summary of Contents for QL10
Page 31: ...ENGLISH NOTES 31...
