20
07.3
ASSEMBLY SEQUENCE
Install the fireplace as follows:
Assembling the ventilation kit (Optional)
1.
Unpack the stove by removing the cardboard. Remove the
mounting brackets and gently move the stove until you put it on
the floor. Place the stove in the location where you want to install
it. When choosing the place to install it, remember that installation
must guarantee easy access to clean the stove, the fume pipes
and the flue, and that the safety distances must be complied
with as provided for in
CHAP.07.4 - SAFETY DISTANCES
FROM SURROUNDING FLAMMABLE MATERIALS.
2.
The stove can operated by picking comburent air directly from
outside or inside the room where it is installed. In the lower
part of the stove, there is an inlet hole for comburent air (
F
ig
.
1
). If comburent air is picked from within the room where it is
installed, a special ventilation opening must be designed with
minimum size of 450 cm
2
. When the combustion air is drawn
directly from outdoors, prepare an inlet for the combustion air
communicating with outdoors via a 100 mm Ø aluminium tube
with a maximum length of 100 cm and connect it to the relative
fitting supplied in the stove assembly kit (
F
ig
. 2-3).
3.
Connect the flue to the fume exhaust according to the technical specifications of the stove and type of fume exhaust as described
below:
a) Top fume exhaust outlet for QL10 and TL10
•
Position the flue sealing cord (supplied with the stove) on the
stove fume outlet. To position the sealing cord, apply some high
temperature silicone on the stove fume exhaust outlet collar (A)
and then position enough sealing cord (B) to fill all the space
between the flue and the fume exhaust outlet collar (
F
ig
. 4).
F
ig
. 1
F
ig
. 2
F
ig
. 3
F
ig
. 4
B
A
Summary of Contents for QL10
Page 31: ...ENGLISH NOTES 31...
