background image

10

 CHAP.03  HANDLING AND TRANSPORT

 

03.1  

RECEIVING GOODS

The device is delivered on a pallet in a cardboard box and protected with shrink wrap cover sheet

when receiving merchandise, check that:

•  all packaging is intact
•  all of the merchandise indicated on the delivery bill has actually been delivered
•  the supply corresponds to the order specifications 
•  if the packaging is damaged, check the condition of the contents, because any breakages must immediately be reported 

to the carrier and to the retailer

•  check there is no damage to any supplied elements; if there is any breakage detected, report it as soon as possible to 

the carrier and to the retailer

If any material listed on the delivery note is missing, report it to the retailer as soon as possible.

 

03.2  

LIFTING AND TRANSPORT

Personnel in charge of handling the product must have read and thoroughly understood the safety prescriptions in 

CHAP.02 - 

ACCIDENT PREVENTION / SAFETY REGULATIONS 

of this manual and must wear work gloves and safety footwear.

For safety reasons, unauthorised persons must not be in the area while the product is being moved.
The product must be moved only with a trolley or pallet fork, and never with belts, chains, overhead cranes (see CHAP.06 - DATI TECNICI 

for the weight). All parts of the packaging coming into contact with the crane, belts or straps must be protected.

Unless there are obstacles, lift the product to a maximum of 30 cm from the ground and move it slowly, avoiding jerky or brusque 

movements.

Danger of crushing, collision and abrasions.

WARNING

Danger of suffocation

Make sure that children do not come into contact with packaging materials, plastic film or polystyrene as this could cause 

suffocation.

WARNING

Summary of Contents for QL10

































Reviews: