background image

ENGLISH

 01.2  SYMBOLOGY

In this manual, points of considerable importance are marked with the following symbology:

INSTRUCTION:

Instructions regarding the correct use of the appliance.

WARNING:

This point is particularly important.

DANGER:

An important point regarding behaviour for preventing injury and damage to 

materials is expressed.

 

01.3 

APPLIED STANDARDS

All JOLLY MEC products are constructed according to the following directives:

• 

EU 305/2011

European construction products regulation.

• 

2006/42/CE

Machines.

• 

2014/30/UE

Electromagnetic compatibility (EMC).

• 

2014/35/UE

Low voltage (LVD) - electrical safety.

• 

2011/65/EU (RoHs 2)

Restriction of the use of certain hazardous substances in electrical and electronic equipment

• 

2014/53/UE

Radio Equipment

• 

97/23/U3

Pressure Equipment (PED)

And in compliance with the standards:

• 

CEI EN 61000-3-2

Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input 

current ≤ 16 A per phase).

• 

CEI EN 61000-3-3

Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage fluctuations and flicker 

in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject 

to conditional connection.

• 

EN 55014-1

Electromagnetic compatibility. - Requirements for household appliances, electric tools and similar 

apparatus - Emission

• 

EN 55014-2

Electromagnetic compatibility – Requirements for household appliances, electric tools and similar 

apparatus - Immunity. Product family standard.

• 

EN 60335-1

Household and similar electrical appliances - Safety. General requirements.

• 

EN 60335-2-102

Household and similar electrical appliances. - Safety. Particular requirements for gas, oil and solid-fuel 

burning appliances having electrical connections.

• 

EN 62233

Measurement methods for electromagnetic fields of household appliances and similar apparatus with 

regard to human exposure.

• 

UNI 7129

Domestic and similar gas systems powered by the distribution mains.

• 

UNI 10412-2

Hot water heating system - Safety requirements - Specific requirements for systems with domestic type 

heating devices powered by solid fuel with built-in fireplace, with total fire power not over 35 kW.

• 

UNI 10683

Heat generators operating with wood or other solid bio fuels - Installation requirements.

• 

UNI EN 303-5

Heating boilers - Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of 

up to 500 kW - Terminology, requirements, testing and marking.

• 

UNI EN 1443

Chimneys. General requirements.

• 

UNI EN 1856-1

Chimneys - Requirements for metal chimneys - System chimney products.

• 

UNI EN 1856-2

Chimneys. Requirements for metal chimneys - Metal flue liners and connecting flue pipes.

• 

UNI EN 13229

 

Insert appliances including open fires fired by solid fuels. Requirements and test methods.

• 

UNI EN 13240

Roomheaters fired by solid fuel. - Requirements and test methods.

• 

UNI EN 13384

Chimneys. Thermal and fluid dynamic calculation methods - Chimneys serving more than one heating 

appliance.

• 

UNI EN 14785

Residential space heating appliances fired by wood pellets. - Requirements and test methods.

• 

UNI EN ISO 12100

Safety of machinery - General principles for design - Risk assessment and risk reduction.

5

Summary of Contents for QL10

































Reviews: