joke 4910880, User Manual

Page: 42 / 68

42
Before starting work, set the POWER, SPOT, TIME, FREQUENCY and WAVE TYPE values, depending on
the type of material to be welded.
The table in figure 47 lists the default settings for various types of material. These data, which were
obtained from laboratory tests on samples of commercially available material, are provided FOR
REFERENCE ONLY. Welding parameters vary depending on the alloy used for the material to be
processed, the chemical-physical characteristics of the material and the surface finish of the piece to be
welded.
All these variables mean that the table should only be used as a STARTING POINT for welding and that the
recommended parameters must not be considered as universal.If you are unable to determine the correct
welding configuration for your application, please contact the manufacturer's technical assistance service.
SETTING THE WELDING PARAMETERS
MACHINE PARAMETERS
MATERIAL
THIN YELLOW GOLD
YELLOW GOLD WIRE
COATED YELLOW GOLD
THIN WHITE GOLD
WHITE GOLD WIRE
COATED WHITE GOLD
THIN RED GOLD
RED GOLD WIRE
COATED RED GOLD
THIN SILVER
SILVER WIRE
COATED SILVER
THIN PLATINUM
PLATINUM WIRE
COATED PLATINUM
THIN STEEL
STEEL WIRE
COATED STEEL
THIN TITANIUM
TITANIUM WIRE
COATED TITANIUM
THIN PALLADIUM
PALLADIUM WIRE
COATED PALLADIUM
THIN NICKEL SILVER
NICKEL SILVER WIRE
COATED NICKEL SILVER
POWER SPOT TIME m/s FREQUENCY
5
6.5
6.5
6.5
6.5
6.5
5
5
6.5
5
5
4
5
1.6
1.9
6
7
7
7
2.5
2.5
5
6.5
8
5
7
8
2
2.4
3.6
1.6
1.7
2.1
1.9
2.2
3.1
3.7
4.2
4.5
0.8
1
1.8
1
1.2
1.8
1.8
0.2
0.2
1.3
1.6
1.8
1.4
1.4
1.9
WAVE
SLO+
SLO+
SLO+
SLO-
SLO-
SLO-
SLO+
SLO+
SLO+
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
NORM
0.2
0.4
0.7
0.2
0.4
0.8
0.2
0.3
0.6
0.3
0.3
0.4
0.4
0.5
0.8
0.3
0.5
0.7
0.7
0.2
0.2
0.2
0.5
0.7
0.7
0.7
0.9 2
2.4
3.6
1.5
1.7
2.3
1.6
1.8
3.2
3.7
4.2
4.5
1.8
1.8
2.2
1
1.
1.8
1.8
1
1
1.6
1.8
2.4
1.6
1.4
1
Figure 47 – DEFAULT welding parameters table