joke 4910880, User Manual

Page: 15 / 68

15 SAFETY
SAFETY LABELS
CONTINUED
This label indicates that the machine is equipped with a laser device,
specifying the respective class and the power rating of the machine in
use. It is 56 x 40 mm in size and positioned on the rear of the machine
above the sticker shown in fi gure 6. When this label is present, it is
mandatory to use the appropriate protective glasses, as recommended
on page 12, when operating the machine.
This label indicates the presence of moving mechanical components,
warning personnel not to place their hands between the parts when in
motion. It is 60 x 30 mm in size and positioned on the upright of the Y
axis, at the extreme right hand end.
This label indicates the presence of radio frequency emissions
that could interfere with pacemakers or other medical devices. It is
mandatory to maintain a safe distance to avoid interference. It is 41
x 30 mm in size and positioned on the upright of the Y axis, at the
extreme right hand end, close to the sticker in fi gure 11.
This label indicates the class of the laser device and the power rating
of the machine. It is 104 x 25 mm in size and positioned on the front of
the machine under the sticker in fi gure 7.
Figure 9 – Laser exposure information
Figure 10 – Laser technical data
Figure 11 – Components in motion
RADIO
FREQUENCY
HAZARD
Dangerous to
pacemakers.
Figure 12 – Radio frequency hazard
RADIO
FREQUENCY
HAZARD
Dangerous to
pacemakers.
This label includes the data relating to the manufacturer (Fig. 13 - Ref A), the electrical specifi cations (Fig.
13 - Ref B) the generator power (Fig. 13 - Ref C) and the risk class of the laser machine (Fig 13 - Ref D).
Figure 13 – Machine identifi cation label
Hersteller:
JOKE Technology GmbH
Asselborner Weg 14-16
D-51429 Bergisch Gladbach GERMANY
To prevent electrical shocks, do not remove covers.
Modell:
ENESKA 1500 Seriennumer:
EN0127
For any service refer only to qualified staff.
Spannung: 230V -10+5% Frequenz: 50/60 Hz
Zur vermeiden von Stromschlagen, entfernen Sie bitte
N°. Phasen: 1 Gewicht: 250kg
nicht die Abdeckungen.
Stromverbrauch:
2.3 KW
Reparaturen bitte nur durch qualifiziertes Personal
Max Energie:
200J
durchfuhren lassen.
Wellenlange: 1064 nm LASER CLASS IV